Switching device safety mats

	New Switching Device (NSD) safety mat Safety mat use has been improved by the New Switching Device (NSD) technology. It offers digital on/off switching, which provides the following: Can outlast over 5,000,000 switch activations Custom-made wire exit positions are available at no extra cost AC or DC input power is obtainable Large single mat capacity to help reduce or eliminate extra interconnect pieces required by other mats, also simplifies installation Designed to be machine interfaced with only NSD safety relay controls for typically open SPST 4-wire safety mats The switching mechanism contains no rigid steel electrodes which can rust and dent Comprised to flexible electrodes to prevent kinking and short-outs as is possible with rigid steel electrodes when bent The electrodes are flexible, anti-static, non-magnetic and non-corrosive There is no vacuum seal to break which would cause rust and dead zones Can absorb punctures There are no wiring solder joints in the mat that may degrade or short out. (Wiring solder joints can fail under heavy loads such as a fork truck or hand cart traffic.); The maximum intermittent load is 3000 PSI NSD safety mats are reliable and the product is long lasting Installation of CSA & UL listed wiring of the mat is shortened and simplified with the use of dual 20' (6.1m) lengths of two-conductor, 22 gauge multi-strand 300 VAC (four conductors total) They are produced especially for the industrial environment High temperature and wet environment, non-skid surfaces are available High temperature welding mats are available They are simple to install One mat allows for many zones Mat housing is dual ribbed Sizes and shapes of mats are custom made, thus eliminating the expense for special tooling Their sensor system (NEMA 6,IP67) contains an air-tight seal Wide range of capabilities Adjusts to uneven factory floor installations Available with custom engineered systems Fast delivery service. __________________________________________________________________________ Featured safety mat products \| About our site \| safety mat resources safety mat info \| safety mats help \| safety mat guides \| safety mat references \| safety mat sources Copyright safetymatguidebook.com. All rights Reserved world wide. All trademarks and service marks are property of their respective owners.

New Switching Device (NSD) safety mat

Safety mat use has been improved by the New Switching Device (NSD) technology. It offers digital on/off switching, which provides the following:

Can outlast over 5,000,000 switch activations
Custom-made wire exit positions are available at no extra cost
AC or DC input power is obtainable
Large single mat capacity to help reduce or eliminate extra interconnect pieces required by other mats, also simplifies installation
Designed to be machine interfaced with only NSD safety relay controls for typically open SPST 4-wire safety mats
The switching mechanism contains no rigid steel electrodes which can rust and dent
Comprised to flexible electrodes to prevent kinking and short-outs as is possible with rigid steel electrodes when bent
The electrodes are flexible, anti-static, non-magnetic and non-corrosive
There is no vacuum seal to break which would cause rust and dead zones
Can absorb punctures
There are no wiring solder joints in the mat that may degrade or short out.
(Wiring solder joints can fail under heavy loads such as a fork truck or hand cart traffic.);
The maximum intermittent load is 3000 PSI
NSD safety mats are reliable and the product is long lasting
Installation of CSA & UL listed wiring of the mat is shortened and simplified with the use of dual 20' (6.1m) lengths of two-conductor, 22 gauge multi-strand 300 VAC (four conductors total)
They are produced especially for the industrial environment
High temperature and wet environment, non-skid surfaces are available
High temperature welding mats are available
They are simple to install
One mat allows for many zones
Mat housing is dual ribbed
Sizes and shapes of mats are custom made, thus eliminating the expense for special tooling
Their sensor system (NEMA 6,IP67) contains an air-tight seal
Wide range of capabilities
Adjusts to uneven factory floor installations
Available with custom engineered systems
Fast delivery service.

__________________________________________________________________________

Featured safety mat products | About our site | safety mat resources

safety mat info | safety mats help | safety mat guides | safety mat references | safety mat sources

Switching Device safety mats